Category: Plumbing

Water Heater Repair – Is it Time to Replace Your Water Heater?

water heater

Water heaters play a critical role in facility operations. When faced with a faulty or aging water heater, it can be challenging to determine whether repair or replacement is the best option.

Insulate your water heater and hot pipes extending from the appliance to reduce energy loss. It would be best to have a plumber replace the anode rod every five years. Contact Water Heater Repair Denver for professional help.

Leaking water heaters can be a huge hassle and cause severe damage to your home. They can flood rooms, ruin carpets and furniture, and cause rotting to wooden structures. This is especially true with gas powered water heaters as the leaking can be accompanied by dangerous and toxic fumes. If you have a leaky water heater, it’s best to turn off the power (for electric water heaters) or the gas line to the appliance immediately. After that, you can proceed with caution to inspect your tank and pipes for problems.

It is important to distinguish between a minor and major water heater leak as this will determine whether or not you need a replacement water heater. Minor leaks can often be repaired by a professional plumber. Major leaks, on the other hand, often indicate that your water heater is nearing the end of its useful life and should be replaced immediately.

Water heaters last between 6 and 12 years, so if yours is older than that, it’s probably time for a new one. There are several places where a leak may occur, but the most common place is the drain valve at the bottom of the water heater. This spigot allows the tank to be drained for maintenance and flushing purposes, but can become loose or damaged over time.

Other possible leak sources include the temperature and pressure relief valve (T&P) and the inlet and outlet connections. If you notice a leaking T&P valve, be sure to turn off your home’s gas flow to the appliance and allow it to cool before you attempt to open the valve. This valve is designed to release steam and water to prevent overpressure in the tank, but if it’s faulty it can leak from anywhere along the lines it connects to.

Pooling water at the top of your water heater is usually caused by the cold and hot water inlet and outlet pipes that bring water into the tank to be heated and then out into your home’s plumbing system when you need it. If you find a loose or detached pipe connection at the top of your water heater, you can use a wrench to tighten it. However, be careful not to overtighten as this could cause further damage.

Water Heater Smells

Over time, a water heater can accumulate dust and grime on its surfaces. When the hot surface comes into contact with this dust, it can start to burn, giving off a burning smell that can permeate a home. If you notice this burning scent, turn off the power to your water heater and wipe down its surface. This should take care of the issue. If the smell persists, you may need to replace your water heater.

If your hot water smells like rotten eggs, it likely is due to a buildup of sulfate-reducing bacteria inside the tank. These bacteria feed on sulfur and produce hydrogen sulfide gas as waste. The resulting gas makes your water smell like rotten eggs, but isn’t dangerous to drink.

In addition to sulfate-reducing bacteria, the rotten egg smell can also be caused by a reaction between your water and the magnesium anode rod in your water heater. This sacrificial piece of metal attracts corrosive buildup to prevent it from gnawing away at more vital parts of the water heater. When the magnesium anode degrades, it releases hydrogen sulfide gas into your water. Changing the magnesium anode to an aluminum or zinc one can help resolve this problem and eliminate that terrible rotten egg smell.

A water heater that smells like gas is another serious concern and should always be dealt with immediately. A natural gas leak is extremely dangerous to your family and pets and should be addressed by a professional as soon as possible. Shut off the power to your water heater and call a plumber to find and fix the leak.

A non-gas leak can be just as dangerous, and you should still seek professional help right away. Loose wiring can cause electrical shorts, generating heat that can melt the insulative covers on the wires and start to burn them. This is a major fire hazard and should be corrected by a qualified electrician. It’s also a good idea to shut off the breakers that supply power to your water heater until this is done.

Water Heater Water Discoloration

The last thing you want to see when you turn on your shower is milky or brown water. The good news is that discolored water is not uncommon and can often be easily remedied. The first step is determining the source of the discoloration. Does the problem occur with only your hot water or cold water? If only your hot water is discolored, the underlying cause may not be your water heater.

It could be the municipality’s water supply. Disturbances to the municipal water supply from flushing fire hydrants, testing or repairs and water line issues can dislodge deposits in your municipal water pipes that can be carried into your home. Run your hot and cold taps to see if the discoloration also appears in your cold water. If both your hot and cold water are discolored, the underlying problem is likely a discolored sediment buildup in your municipal water pipes or a bacteria issue that needs to be addressed.

On the other hand, if your whole house is experiencing the same discoloration and it’s only in your hot water, it’s probably a problem with your water heater or the piping that connects to it. Older galvanized steel water heater tanks and piping are especially susceptible to rust and corrosion that can release rusty orange or dark brown water into your hot water supply.

Over time, mineral sediment that condenses out of your hot water can accumulate in layers on the bottom of your water heater tank. This not only discolors your hot water, it can block the gas burner and electric elements, raise operating costs and shorten the life expectancy of your water heater. Regularly draining and flushing your water heater tank will help prevent these problems.

If your water heater is ten or fifteen years old and you’ve been noticing discoloration in your hot water, it may be time to replace it. A newer, more efficient model will not only provide better quality hot water, it’ll also save you money on your utility bills.

Water Heater Not Heating

There’s nothing worse than stepping into your shower to start your day only to be greeted by ice-cold water. If you’ve tried turning up the temperature on your water heater and are still having problems, it could be a sign that your hot water heater needs to be replaced. If you’ve experienced this issue over a long period of time, it’s probably a good idea to invest in a new water heater that will be more energy efficient and cost less to operate.

If your water heater is not producing hot water at all, it may be a sign that the upper heating element has stopped working or that the pilot light has burned out. If this is the case, you can try relighting the pilot light by following the instructions that come with your water heater. If you’re unable to get the pilot light to stay lit, this could indicate that there is a problem with the thermocouple, which is designed to stop gas flow if it senses that the pilot light is out.

Another possible cause for a lack of hot water is that your home’s electrical system is not providing sufficient power to the water heater. In some cases, this can be caused by a faulty or overloaded breaker. If this is the case, it’s a good idea to call a qualified electrician to determine what is causing the issue and how to resolve it.

In addition to a lack of hot water, you may also notice that your water heater is making strange noises or leaking water around the base of the unit. If you’ve noticed this issue, it’s important to turn off the power to your water heater immediately and contact a professional plumber to inspect it.

If you’ve turned off the power to your water heater and are still experiencing issues, there could be a problem with the temperature-pressure relief valve on the tank. This is a safety feature that’s designed to prevent overpressure and leakage, so it should be replaced as soon as possible.

The Importance of Sewer Line Maintenance

Homeowners are responsible for maintaining the line between the house and the sewer main. Proper maintenance can reduce the risk of costly repairs and clogged pipes.

Sewer Line

Typical signs of a clogged sewer line include slow draining and toilet gurgling sounds. If you notice these symptoms, contact a plumber immediately. Visit https://www.plumbing-express.com/ to learn more.

The best way to protect your sewer line against the threat of root infiltration is to take preventative measures. These include frequent sewer cleaning, regular inspections, and root barriers.

Root infiltration can result in a number of problems, from clogged drains and toilets to broken and leaking pipes. In some cases, severe damage can require sewer line replacement. This is why it’s crucial to act promptly when you notice signs of root intrusion, such as gurgling noises from drains or toilets and slow-flowing water.

A professional plumber will be able to quickly identify the problem and recommend the most effective solution. In most cases, removing the root infiltration and repairing the affected pipes will be enough to restore proper operation of your sewer line.

In some cases, your plumber may use chemical solutions to kill the invading roots and discourage future growth. This method is typically used when other options have failed or are deemed too hazardous for the plumbing system.

You can also prevent tree roots from infiltrating your sewage line by implementing certain landscaping practices. When planting new trees or shrubs, choose ones with small and slow-growing roots. If you want to plant them close to your home, make sure the roots won’t interfere with the sewage line by having the tree professionally pruned.

Another helpful tool to avoid root infiltration is a specialized drain cleaner. These products can be purchased from most hardware stores and are designed to clear clogged drains without damaging your plumbing pipes. Make sure to always follow the manufacturer’s instructions when using these products.

Finally, consider having your sewage line regularly inspected by a professional to ensure it is in good condition. Professionals can use a special camera to detect any damage or potential issues. This can be a quick and cost-effective solution to preventing serious problems in the future.

Even with the best preventive measures, you can still experience serious blockages from roots infiltrating your sewer lines. This is why it’s so important to have a plan in place for dealing with these problems as soon as you notice them. By taking these steps, you can rest assured that your sewage lines will operate properly for years to come.

Schedule Regular Cleanings

Many homeowners do not think about their sewer lines – after all, they are out of sight and out of mind until something goes wrong. However, neglecting your home’s drain lines can lead to serious problems, such as sewage backups and costly repairs. That’s why it’s important to schedule regular cleanings and inspections. With routine maintenance, you can prevent many of the common causes of sewer line clogs and other problems.

The main function of your home’s sewer lines is to transport wastewater and sewage from your plumbing system to the city’s sewage system. The sewage system then processes the waste and flushes it into the waterways. If these lines become clogged with solid debris, it can cause major plumbing issues and disrupt your home’s normal operations. A clogged sewer line can also cause raw sewage to back up into your home, which can create health and safety concerns for you and your family.

While you can do your part to prevent clogs by not pouring cooking grease down your drains and only flushing toilet paper, it is crucial to get your sewer line regularly cleaned by professionals. Professionals can use hydro jetting to scour the interior of your pipes, breaking up and removing blockages. They can also use cameras to check the condition of your pipes and identify any damage or cracks. Regular cleanings can also help reduce odors caused by accumulated debris.

It is recommended to have your sewer lines cleaned every 18 to 22 months, depending on household size and usage. This will keep your pipes free of debris, preventing clogs and ensuring a smooth flow of wastewater away from your home.

It’s also important to have your sewer lines inspected after heavy rains or snowstorms to ensure there are no broken or damaged parts that may need to be replaced. You can also prevent tree roots from infiltrating your sewer line by having it monitored and cleaned on a regular basis. Performing this preventative maintenance can save you a lot of money and hassle in the long run by avoiding expensive sewer line repairs.

Keep Trees Away From Your Sewer Lines

Trees add a great deal of beauty and value to homes. They boost curb appeal, offer shade on a hot day, and can even help with home air quality. However, if trees are planted too close to sewer lines they can quickly wreak havoc, causing a blockage that can damage pipes and lead to expensive repairs. Knowing how to prevent this from happening is crucial.

The most effective way to keep tree roots away from your sewer line is by limiting how many trees are in the area and choosing the right type of tree. If you must plant a tree close to the sewer line, select “sewer safe” trees that have slow growth rates and smaller root balls. It’s also a good idea to treat any existing trees with a chemical that can kill roots.

If you notice any apparent signs that your sewer line is being invaded by tree roots, call an experienced plumber right away. They can use a camera to inspect the situation and determine how bad the problem is. Taking prompt action can save you thousands of dollars in repair costs down the road.

Even if you aren’t noticing any obvious problems with your sewer line, it’s important to have an experienced plumber regularly inspect the line to make sure it is still in good condition. A regular inspection can also help you stay ahead of clogs, and keep them from getting worse.

For more severe clogs, the plumber might recommend hydro jetting. This technique uses a high-powered hose to force major clogs and even blast out tree roots. This service is more expensive than snaking out a drain, but it can be much more cost-effective in the long run.

When a tree has already infiltrated your sewer line, the first step is to remove all organic debris from the access point. Once this is done, it’s a good idea to treat the line with a chemical that can kill any remaining roots. This will need to be repeated at least once a year. After that, the next best option is to install an exterior drain root barrier. This will ensure that roots never gain access to your home’s sewer lines again.

Schedule Sewer Line Repairs

The sewer line is a vital part of a home’s plumbing system. Regular maintenance of the line helps to prevent blockages and reduce costly repairs. When problems do occur, however, it is important to address them promptly. Failure to do so can result in sewage backups, foul odors, and water damage to the home. If you suspect that your sewer line is damaged or clogged, there are several signs to look for that can alert you to the issue.

The first thing to do if you suspect that your sewer line is damaged or in need of repair is to stop all water usage immediately. This includes toilets, showers, and sinks. It is also a good idea to remove any standing water from the yard. This can help to limit the amount of sewage that seeps into the soil and makes its way to your home.

Once you have stopped all water usage, it is important to contact a professional plumber who specializes in sewer lines. They will be able to run a camera through your pipes and identify the root cause of the problem. Once they have identified the problem, they will be able to recommend the best course of action for repair.

Repairs to the sewer line can be extremely costly, depending on the severity of the damage and the extent of the work required. When possible, addressing problems in the winter can help to reduce these costs.

Before beginning any repairs, it is important to have all underground utilities marked. This will ensure that the repair crew does not accidentally damage any other underground pipes or infrastructure. It is also a good idea to have any trees that are close to the lines cleared so that they do not fall on the repair crew during the work.

Working outdoors during the winter can present a number of safety concerns for the repair crew. These include slippery surfaces and limited visibility, which can lead to accidents and delays. It is important to choose a reputable repair service that has experience working in winter conditions.

The Importance of Drain Cleaning

Drain Cleaning

The odors that result from dirty drains can cause serious health problems. Regularly cleaning your drains prevents the buildup of grime that can cause blockages and bad smells. For professional help, contact Plumbers Aurora CO.Drain Cleaning

Baking soda and vinegar are a natural, inexpensive, and non-toxic way to clean your drains. They create a chemical reaction that breaks down grease, soap scum, and hair products.

Smelly drains aren’t just unpleasant; they can be a sign of serious plumbing problems. Some smelly drains can be resolved with simple DIY methods, while others require a professional plumber.

Bathroom and kitchen sink drains are prone to developing bad odors, especially when hair, food scraps, soap particles, and grease accumulate. These items can create biofilm, which gives off a foul odor when they decompose. Bacteria in the pipes also produce a rotten egg-like smell when they feed on these materials.

To get rid of smelly drains, pour down a solution of baking soda and white vinegar. The mixture works as a natural disinfectant, and the fizzy reaction helps break up clogs. You can also use a plastic drain snake to dislodge hair and other gunk from the pipes. To do this, remove the drain stopper and plug, or aerator. Use the snake to go down the drain, and slowly wiggle it through the clog until you reach the blockage. Be careful not to touch the cable or push it down too far into the pipe.

A more rudimentary but effective DIY method involves using a wire hanger as a clog tool. Unwrap the hanger and snag the hook end inside the clog. Pull the hanger up and rinse out the clog. If these homemade deodorizing solutions don’t work, it’s time to call a professional.

Persistent odors from your drain could be caused by mold, or they may signal a blocked vent stack on the roof. A professional plumber can clean the vent and solve this problem.

Clogged drains can lead to sewage smells.

When a drain smells, it’s important to figure out the cause. It might be as simple as a clog, or it could be something more serious, like sewage. If it’s a clog, a plumber can help you get it fixed and prevent future issues.

Sewage Smells

As sewage decomposes in the drain line, it creates noxious gases and fumes. These can permeate the home if the drains aren’t working properly or have been blocked by something like a tree root.

The good news is that a little sleuthing can often find the source of the smelly drain. A few DIY methods can help you fix it and keep your drains smelling fresh.

A Drain Snake

You can use a plastic plumbing snake to break up and remove a clog in your sink, shower, or tub drain. Remove the drain plug or stopper, then slowly feed the snake down into the clogged drain. The short, tough bristles on the snake will collect hair, gunk, and other debris coating the inside of your drain. Once the clog is removed, remove the snake and rinse the drain opening with hot water. Repeat this process every 2 months to keep your drains smelling fresh and flowing well.

Baking Soda

Baking soda is a classic cleaner that can help reduce stinky drains. It reacts with boiling water to remove odors and dissolve oily buildup in your pipes. Sprinkle a teaspoon of baking soda down the drain, and then follow it with hot water. This can also help eliminate odors from garbage disposals.

A Natural Drain Treatment

Another way to avoid stinky drains is to add a natural drain treatment, such as BioOne. This product adds non-smelly, helpful bacteria to your drain lines that go to work eating away any food, hair, or other debris. It’s safe for most drain lines, but you can check your specific system before adding it.

It’s also a good idea to regularly clean your drains with homemade cleaning solutions. Make it a habit to wash your drains with boiling water after every use to clear out any hair, grease, or soap scum. You can also try flushing your drains with a mixture of vinegar and baking soda.

Clogged drains can lead to water damage.

Unless you are careful to prevent drain clogs, they can cause significant water damage and disrupt the comfort of your home. In fact, if the clog is not remedied in time, it can lead to a host of additional problems, including:

If you don’t regularly clean your drains, waste will build up inside the pipes. This can result in a sluggish flow of water as well as a foul smell that will spread throughout your home. In addition, the sewage from your toilet may start to back up into the sink, which can damage your pipes and lead to costly repairs.

Water damage caused by clogged drains can affect the integrity of your house and even decrease its value. This is because the dampness from leaks or overflow can encourage the growth of mold and mildew, which are known to eat away at your walls, flooring, and other structural components. Additionally, stains and other signs of water damage can make your home less appealing to buyers.

When you have a clogged drain, water cannot pass through your pipes and will start to collect in the sink. As the clog gets worse, it can even begin to flood your home, which can cause serious damage and ruin your possessions. Additionally, the contaminated water can seep into your electrical system, which can cause a dangerous fire.

Leaks from a clogged drain can also affect your home’s foundation and even make it unstable. This can lead to expensive repairs and potentially lower your property’s value.

Another problem with clogged drains is that they can breed bacteria and other microorganisms that can be very dangerous to your family’s health. These contaminants can contribute to illness, including Legionnaires’ disease, peptic ulcers, and respiratory issues.

Despite the risks, many homeowners don’t realize that drain clogs can be much more than just an inconvenience. They can also impact your home’s livability and safety, so it’s important to always take steps to prevent them. Using a sink strainer to stop food from entering the drain, installing a shower head with a filter to trap hair, and making regular use of drain cleaners can help you avoid costly repair bills in the future.

Clogged drains can lead to health issues.

When a drain is clogged, the resulting stagnant water can breed bacteria that are dangerous to your health. This is because bacterial growth thrives in dark and damp environments, and a clogged drain offers these conditions to bacteria that can lead to infections and other health issues. Additionally, the odors produced by clogged drains can cause headaches, fatigue, and stress-induced anxiety for some people.

In addition to bacteria, a clogged drain can also create a breeding ground for pests and insects such as flies, gnats, and mosquitoes. Some of these insects may carry diseases that can affect your family’s health. Additionally, a clogged drain can lead to water contamination by allowing contaminated waste water to seep into the household plumbing system and diffuse through your home’s clean drinking water.

Stagnant water that results from a blocked drain can also cause skin infections and rashes because of the bacteria and other microorganisms it is full of. It can also lead to fungal growth, especially if the water contains nutrients that are needed for fungi to grow. If the clogged water is located close to your home’s floorboards, it can also flood your home, damage your belongings, and stain your floors.

What Plumbing Services Can Do for You

Plumbing

Plumbing services cover a wide range of tasks, including drain cleaning, leak detection, water heater installation, and more. Choosing a reputable plumber can help you avoid costly repairs down the road.Plumbing

Plumbers offer reliable service and clear communication. Their technicians should also take all necessary safety precautions.

Whether you’re dealing with a stubborn clog or just want to keep your drains and pipes as clean as possible, this is a service that should not be overlooked. Professional plumbers have the tools and experience necessary to thoroughly clean your drains without causing any damage.

Most clogs are caused by food debris, hair, soap scum, and other things that collect inside your drain lines. These items can cause the lines to become narrow or blocked, leading to backups and other problems. Regular drain cleaning can help prevent these issues by keeping things moving through the system.

Plumbing services can use a variety of methods to clean your drains, including chemical cleaners and mechanical augers. They can also use advanced equipment like video camera systems to locate and identify the source of the clog. With these tools, plumbers can clear even the most stubborn drain clogs without damaging your pipes or your home’s plumbing fixtures.

Blocked drains are one of the most common reasons people call for plumbing services. They can be extremely frustrating and may even lead to serious property damage if not addressed quickly. Fortunately, there are many things you can do to avoid blockages in your home’s drains, such as installing drain traps and screens.

If you notice a gurgling sound or air bubbles coming from your toilet, shower, or sink, it’s time to call a plumber for drain cleaning. A plumber can use powerful water jets to scour the entire length of your pipe, removing any buildup and leaving you with clean, healthy pipes.

Professional plumbers can also use chemical drain cleaners to remove stubborn clogs that are too difficult for plunging. These products are designed to break down and dissolve organic matter in your pipes, making them effective for a wide range of clogs. However, it’s important to note that these chemicals can be harmful to your health and the environment if not used properly. Therefore, it’s always best to let a plumber handle these tasks. A good plumber will be able to choose the right drain cleaning product for your needs and use it safely without damaging your pipes or the environment.

Leak Detection

Detecting leaks as soon as possible is an important part of plumbing services. This is because leaking pipes can cause extensive damage to your property and lead to side effects such as mold and mildew, which require expensive repairs. Leak detection services use advanced technologies to quickly and accurately pinpoint the location of a leak. They can also help prevent water loss by shutting off the water supply to a leaking pipe.

Unlike conventional plumbing, which involves searching for physical signs of leaks in your home’s pipes and fixtures, modern electronic leak detection services can locate even the smallest leaks. These services can also provide recommendations for repairing the leak and preventing future problems.

Leak detection services can save you a lot of money in the long run. This is because leaking pipes can cause significant damage to your home’s structure and increase your utility bills. In addition, a leaking pipe can also lead to the development of harmful microbes in your home, such as mold and mildew, which can pose health risks for you and your family.

The most common sign of a leak is a wet spot on your floor or walls. However, some symptoms may be more difficult to notice, such as an unusual noise in your pipes or a decrease in your water pressure. Fortunately, many plumbing companies offer 24-hour emergency leak detection and repair services to address these issues as soon as possible.

A plumber who specializes in detecting leaks can recommend the best solution for your needs. These technicians have the skills and equipment needed to identify and repair all types of leaks, whether they’re caused by broken pipes or sewer line problems. They can also install a whole-house leak detection system, which monitors the water pressure in your home and can alert you to changes before they become serious problems.

A plumber who specializes in detecting leaks will be able to provide you with a wide range of services, including installing a whole-house leak detection system. They can also repair existing leaks and perform drain cleaning to remove debris that has built up in your pipes. They can even replace your entire plumbing system if necessary.

Water Heater Installation

There are a lot of things that can go wrong with a water heater, so it’s a good idea to have a skilled plumber inspect and repair it if necessary. A plumber can also install a new tankless water heater to save you money and energy. They can also perform a safety inspection to make sure there are no gas leaks.

One of the most important plumbing services that a plumber can offer is sewer line cleaning and maintenance. They can help prevent clogs by clearing out the drain lines with hydrojetting equipment. This is a highly effective way to remove debris, tree roots, and other obstructions that can cause issues with your plumbing.

A plumber can also repair broken or damaged toilets, faucets, and fixtures. They can also replace worn-out washers and seals to keep your water flowing smoothly. They can also install a new garbage disposal to help you get rid of waste more efficiently.

Another crucial plumbing service is drain line installation and repair. They can help you get back up and running after a sewer backup, broken pipe, or other issue has impacted your home’s drainage system. This includes installing new piping, repairing existing pipes, and rerouting sewage to avoid a future backup.

Many people try to do DIY plumbing tasks, but this can be risky, especially for older homes with outdated pipes. A professional plumber will have the tools and skills to fix the problem quickly and correctly. They can also help you prevent future problems by advising on the best maintenance procedures.

The plumbing industry is booming, and there are plenty of opportunities for those with the right skills and experience. However, before choosing a plumber, it’s essential to do your research and find out which ones are licensed and certified by the relevant authorities. A good place to start is by reading online reviews and recommendations. You can also ask friends, family members, and colleagues for their recommendations.

Another thing to look for in a plumbing service is their years of experience and client records. You should also check whether they have the required insurance to work on your property. Lastly, make sure the plumber you choose is knowledgeable and friendly. They should also be able to provide you with a free estimate and answer any questions you may have.

Sewer Line Inspection

Whether you are looking to buy a new home or you are already living in one, it is essential to have your sewer lines inspected on a regular basis. A damaged or misplaced line can lead to serious problems for your home and yard. Some of the most common signs of a problem include low water pressure, unsatisfactory drains, or dirty-smelling water coming out of your sinks and toilets.

A skilled plumbing service can perform a visual inspection of your sewer pipes using a special camera called a “scope.” The camera is fed through the sewer cleanout, which is usually located in the basement but can also be found in crawlspaces or outside. It is connected to a monitor that both you and the technician can watch. This provides a clear view of the condition of the pipe, its joints, and any obstructions or cracks that may need to be addressed.

The technician may also remove a toilet to get a more complete look at the condition of your sewer line. He or she can then provide a written report with pictures of the line and an explanation of its condition.

In some cases, the results of a visual sewer inspection will indicate that there is an immediate and serious issue that needs to be addressed immediately. This could be a major leak or severe blockage that requires immediate action, or else it might result in costly repairs down the road.

A less urgent reason to have a sewer line inspection is before you add an additional bathroom or make other changes that will increase the amount of wastewater your home produces. This will help ensure that your current sewer line can handle the increased flow without overflowing or breaking.

The most significant reason to have a sewer line inspection is to avoid future problems and expensive repairs. Even a small problem can cause major damage and flooding to your property, so it is worth the investment in a professional inspection to avoid a messy situation down the road. Besides, most mortgage companies require that you have a sewer scope before you close on a new house, so it is an excellent way to protect your investment.